Cable puller is small and exquisite, with reasonable and compact structure. It weighs only 2 kilograms. It is suitable for any vehicle bundling project. A car only needs one piece and is easy to carry and keep with it. Quick and labor-saving operation, can pull straight, can pull, single person can finish the binding work in an instant.
When the tightener is used, the wire rope or galvanized iron wire on the tightener is loosened and fixed on the cross-arm, and the wire is clamped by the wire clamp, then the special plate hand is pulled. Due to the anti-reversal effect of the ratchet pawl, the wire rope or galvanized iron wire is gradually wound on the ratchet drum to tighten the wire. Secure the tightened wires to the insulators. Then the pawl is loosened to make the wire rope or galvanized iron wire loosen, then the clamp is loosened, and finally the wire rope or galvanized iron wire is wound on the roller of the ratchet wheel.