Precautions for installing and using the Electric Chain Block

- Apr 02, 2019-

The safe use of the Electric Chain Block is very important. When installing the electric chain hoist, an elastic buffer should be installed to prevent the derailment from occurring at both ends of the hoist. Be sure to check the wire rope safely, pay attention to the tightness, and then check all power circuits.

 

At the same time, it is necessary to carry out a comprehensive inspection of the electric chain hoist to check whether the track and the wheel are engaged. If there is any misconnection, it should be corrected in time. In addition, the lubricant should be applied to the place where lubrication is required. The limiter should be flexible, and the connection must be correct.

 

The first thing to do before using the electric chain hoist is to conduct a comprehensive inspection to check whether there are obstacles around the operator and whether there are floating objects around the equipment; check whether the electric chain hoist brake can be used normally, and there is no debris in the running track; Partially connected, not loose, skating flexible, often lubricated with lubricant. There is no crack in the wire rope. It is forbidden to overload the electric chain hoist during use to avoid accidents.

 

http://www.yc-lift.com