What is the reason why the Galvanized Hand Chain needs lubrication?

- Mar 16, 2019-

We will see some places where Galvanized Hand Chains will be used in life, and we can also see the use of lubricants on galvanized chains. After each cleaning, wiping or cleaning of the galvanized chain with solvent, it is important to add lubricant and ensure that the chain is dry before adding lubricant.

 

First, the lubricating oil is infiltrated into the chain bearing part, and then it becomes viscous or dry. This will reliably lubricate the parts of the chain that are easily worn (two joints on both sides). Good lubricants, which start to feel like water, are easy to penetrate, but over time they become sticky or dry, which can last a long time.

 

After lubricating the oil, use a dry cloth to wipe off the excess oil on the chain to avoid the adhesion of dirt and dust. Before reinstalling the chain, remember to clean the links to each other to ensure that no dirt remains. After the chain is cleaned, it is necessary to put some lubricant on the inside and outside of the shaft after assembling the magic deduction.

 

The lubricating oil of the galvanized chain is mostly viscous and liquid. It can be effectively adhered to the surface of the galvanized chain. This layer of oil can form a layer of protection on the surface of the chain, so that the galvanized chain is in operation. There is no greater external wear, as the lubrication of the chain oil reduces the friction between the chain and other components. It can also slow down the oxidative corrosion of the chain substrate and prolong its service life.

 

http://www.yc-lift.com