The main function of YC Beam Clamp holder is to fast fix the skirt. The base of the holder is welded to the side of the guide groove. The slide is deep into the base, which can move the holder along the base to the right and left. Manually rotate the pressing handle and push it up and down as appropriate to apply sufficient pressure to the angled aluminum to maintain the apron position and the compression handle will not loosen.
YC Beam Clamp holder is made of hot-dip galvanized material, which has the characteristics of light weight, good anti-corrosion performance and no rust. The relevant fastening bolts are made of stainless steel 304, never rust, suitable for dark and humid. Even use in a short water rinse environment. In addition to the first installation, the YC Beam Clamp holder base needs to be welded, the rest of the process and the subsequent replacement of the skirt, no need to use any tools, installation and disassembly is very convenient and fast, can save users a lot of time.
There are many factors to consider when choosing a YC Beam Clamp holder, including part shape, orientation and size differences, part weight, environment, and so on. If the object has two opposite planes, a double clip parallel holder can be used, which solves the dimensional deviation problem. For cylindrical objects, double clip holders can also be used for clamping.
The YC Beam Clamp clamp must have a clamping force sufficient to hold the object in place when performing the desired operation on the object. In addition, the YC Beam Clamp holder used in harsh environments or clean rooms needs to have a corresponding design to ensure that the corresponding use effect can be achieved.